Aurioo’s Linglong Scalloped Blossom, Scalloped Fern and Pastel Floral cups all have the same listed height: 6.5 cm. Their capacities range from 200 to 350 ml. Choosing the smallest capacity therefore gives you no extra listed clearance beneath your coffee machine’s outlet.

To check the fit, compare the cup with the space where it will actually sit. The handle, supporting surface and any scale or saucer also need room.

Compare the three cup dimensions

The Scalloped Blossom cup and saucer has a gently tapered body, softly scalloped mouth and curved heart-shaped handle. Its listed diameter is 8 cm. The Scalloped Fern pairing is 9 cm across, also with a scalloped rim and curved handle.

The Pastel Floral cup and saucer has a straight-sided body and a rounded rectangular handle. It shares Fern’s listed diameter and height, while holding a different stated volume.

Linglong design Cup diameter Cup height Cup capacity Saucer diameter × height
Scalloped Blossom 8 cm 6.5 cm 200 ml 15 × 1.5 cm
Scalloped Fern 9 cm 6.5 cm 250 ml 15 × 1.5 cm
Pastel Floral 9 cm 6.5 cm 350 ml 15 × 1.5 cm

These are catalog dimensions. Each One option includes one porcelain cup and its matching saucer; Value pack(2) includes two pairs. Handmade pieces may vary slightly, so a close fit needs measurements of the actual cup.

Linglong Scalloped Blossom porcelain cup with its matching white saucer

Measure the usable gap under the outlet

With the machine switched off and cool, arrange the drip tray or cup support as you normally use it. Measure vertically from the surface that will support the cup to the outlet above its intended position. On an espresso machine, include the portafilter and spouts in their usual brewing position.

If you use a scale, put it in place first and measure from its top surface. Compare that gap with the actual cup’s height at its highest rim point. Allow room to place and remove the cup without scraping it against the outlet; matching two nominal measurements exactly is not enough.

A useful example appears in Coffee Blog’s Judge cup review. In a 2016 update, the reviewer described his short, wide Judge cups as working well with his Gaggia Classic. For these Linglong pieces, measure your own cup and machine.

Check the handle and the supporting surface

Look at the available width around the cup position. The 8 cm and 9 cm diameter figures do not tell you the full span across each handle. If space is tight beside a second outlet or the machine’s housing, obtain that measurement before ordering.

With an empty cup, check that its base rests flat and steadily on the support. It should sit beneath the outlet without having to balance on an edge. Try the movement you will use to put it down and pick it up, including room for your fingers around the handle.

Linglong Scalloped Fern cup and white saucer showing the curved handle

Decide where the saucer will sit

All three saucers are listed at 15 cm across. You can keep the saucer beside the machine and place the cup on it after dispensing. If you want the pair beneath the outlet together, check the wider footprint and measure the assembled pair with the cup properly seated.

The separate cup and saucer heights do not establish their combined height: the way the cup sits in the saucer matters. Measure the actual arrangement, including a scale if one is part of it.

For a machine with an adjustable outlet or cup support, follow its manufacturer’s instructions. Check fit in the configuration you will use. If clearance remains uncertain, send Aurioo the usable gap and request the missing cup measurements before ordering.

Linglong Pastel Floral cup and matching decorated saucer

Frequently asked questions

Will the 200 ml Blossom cup fit more easily than the 350 ml Pastel Floral cup?

Both have a listed height of 6.5 cm. Blossom’s listed diameter is 1 cm smaller, but total width including the handle still needs checking. Capacity alone cannot answer the fit question.

Can I use the saucer beneath the cup while dispensing?

Check whether the 15 cm saucer rests securely on your machine’s support and whether the assembled pair clears the outlet. Keeping the saucer beside the machine is another option.

Is a 6.5 cm gap enough for these cups?

Do not rely on an exact match with the listed height. Check the actual cup and leave room to position and remove it comfortably, with any scale or saucer already included in the measurement.